Table of Contents
Advertisement
3. Click the icon located next to EpsonNet Print.
4. Follow the on-screen instructions to complete the installation.
Your computer is now set up to print using LPR via EpsonNet
Print. See the next section to set up your printer.
For Windows XP/Server 2003/2000/NT 4.0 Users
Follow the steps below to add a port using the Add Printer
Wizard.
❏ If you want to add a port for a printer with its IP address
assigned automatically by the DHCP server or router, see
Adding a port for a printer assigned with a dynamic IP
address.
❏ If you want to add a port for a printer with its IP address
assigned manually, see Adding a port for a printer assigned
with a static IP address.
Note:
❏ Be sure that the computer is connected to the network and TCP/IP
is correctly set.
❏ Be sure that the target Epson printer driver is installed on the
computer.
❏ A valid IP address must be assigned to the printer.
Adding a port for a printer assigned with a dynamic IP
address
1. For Windows XP: Click Start and then Printers and Faxes.
Under Printer Tasks, click Add a printer to start the Add
Printer Wizard.
Network Software
3
3
3
3
3
3
3
3
3
3
3
3
173
Advertisement
Table of Contents
Troubleshooting
