Epson Stylus PHOTO 950 User Manual page 28

Open the printer cover and set the adjust lever to the
^ position.
Note:
Return the adjust lever to the standard m position after printing
envelopes. To avoid gaps, always return the adjust lever to the
^ position before printing on other media.
When the adjust lever is in the ^ position, make sure that the
High Speed check box in the printer driver's Advanced dialog
box is cleared. To clear this check box, you may also need to
change the Print Quality setting.
Raise the paper stopper (lower) when loading C6 envelopes and
the paper stopper (upper) when loading No.10 and DL
envelopes, as shown in the illustrations.
When loading C6 envelopes
When loading No.10 and DL envelopes
19
Paper Handling