Epson Stylus PHOTO 950 User Manual page 81

4. Select the types of cutting from the Auto Cut list box.
The Auto Cut settings are as follows:
Not Cut
Single Cut
Double Cut
No cutting with the cutter is done.
The paper is cut at the boundary between images
(the boundary between pages). However, the
cutting position may shift slightly.
If you have selected Single Cut and are unhappy with
the gap of the cutting position, select Double Cut. In
this mode, the space between images is extended
and the paper is cut twice inside this space. By
cutting twice, an 18 mm slip of paper is left. Double
Cut is selectable only when printing with No Margins
selected.
Using Automatic Roll Paper Cutter
4
4
4
4
4
4
4
4
4
4
4
4
72