Making Multi-Page Settings - Epson Stylus PHOTO 950 User Manual

6. Make sure that paper is loaded in the sheet feeder and send
the print job from your application.
7. Instructions for printing the inside pages will be displayed
while the outside pages are output. Follow the on-screen
instructions for reloading the paper, or refer to the illustration
in the previous section titled "Standard double-sided
printing" on page 156.
Note:
The paper may curl during printing due to the amount of ink
used. Should this occur, slightly curl the sheets in the opposite
direction prior to reloading them into the printer.
Align the sheet stack by tapping its edges against a hard, flat
surface prior to reloading the stack into the printer.
Follow the instructions provided when reloading the printouts.
Paper jams or improperly placed binding margins may occur if
the printouts are not reloaded correctly.
In the event of a paper jam, refer to "Paper Does Not Feed
Correctly" on page 313.
8. Once the paper is reloaded, click Resume to print the inside
pages.
9. Once printing is complete, fold the sheets and bind them
together using a stapler or other binding method.

Making Multi-Page settings

Selecting the Multi-Page check box allows you to choose between
the N-up and Poster settings. Refer to the appropriate section
below.
Printing with Windows
6
6
6
6
6
6
6
6
6
6
6
6
162