Table of Contents
Advertisement
The hob should beep and the LED above the sensor should
illuminate. The hob will now be significantly more protected from
inadvertent use. The On/off sensor (9) can still be used to switch the
hob off but when it is turned back on the lock will still be active.
To deactivate the safety key lock
To switch off the lock, switch on the hob if necessary and then
touch and hold the safety key lock sensor (10) for approximately 1
second. The hob should beep and the LED above the sensor should
extinguish. The hob should now be useable as normal.
Residual Heat Indicator
The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after use. An ' ' will show in a
zone's indicator for a preset period of time after the hob has been
used.
IMPORTANT: You should avoid touching any zone whilst the hob is
in use or whilst residual heat indicators are displayed. In the event of
a power cut or failure the residual heat indicators will not illuminate
after the power supply is restored, nor when there is no power supply
to the hob, yet the hob zone(s) may still be hot so extra care must be
taken.
18
Advertisement
Table of Contents
