Safety Key Lock - CDA HN9841FR Installation, Use And Maintenance Manual

Table of Contents

Advertisement

To cancel the bridge
Simply touch the same two sliders that were used to activate the
bridge function. If the bridge has been successfully cancelled then
the two zone indicators that were bridged will each display a '0'. The
zones will now be individually operational.
Please note: Pans placed on bridged zones must always cover the
vertical markings (II) on the zones;

Safety Key Lock

To prevent accidental use, the hob has a safety key lock which
switches controls off temporarily or completely. The safety key lock
can be activated when the hob is turned on but not when power has
been switched off at, or the appliance disconnected from, the mains.
Disconnecting the appliance from the mains will deactivate the safety
key lock.
To activate the safety key lock
Turn on the hob, set a power level if required, and then touch and
hold the safety key lock sensor (10) for approximately 1 second.
17

Advertisement

Table of Contents
loading

Table of Contents