PCU 321
10.2 Basic Functions
Operating
software
HMI Pro sl
HMI sl
10.2
Basic Functions
Note
After ramping up the control, the image "Operating area diagnostics" opens up, determined
by an ini file. As opposed to the HMI sl standard software, the areas Machine and Parameter
areNOT displayed.
The basic functions are grouped in the following operating areas in the control - as opposed
to the HMI sl standard software:
• Program Manager
• Diagnostics
• Commissioning
Program Manager operating area
In the area Program manager, those functions are displayed which are required for handling
the control. When pressing the menu step switch (expansion of the softkey bar in the same
menu), the system data for the HMI and the PLC as well as the series start-up are displayed.
154
Component
OP 08T, OP 012, OP 12T, OP 015A, OP 015AT, TP 015A, TP 015AT
OP 08T, OP 010, OP 010C, OP 010S, OP 012, OP 012T, OP 015, OP 015A,
OP 015AT, TP 015A, TP 015AT
System data HMI, series start-up of the PLC/HMI data
Alarm list, variable view and version
See Commissioning Manual.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal