Siemens SINUMERIK 840D sl Operating Manual page 115

Proceed as follows
Several magazines
If you have configured several magazines, the "Load to ..." window appears after pressing
the "Load" softkey.
If you do not want to use the suggested empty location, then enter your desired magazine
and magazine location. Confirm your selection with "OK".
Multiple load points
If you have configured several loading points for a magazine, then the "Load point selection"
window appears after pressing the "Load" softkey.
Select the required loading point and confirm with "OK".
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
3. Place the cursor on the tool that you want to load into the magazine (if
the tools are sorted according to magazine location number you will
find it at the end of the tool list).
4. Press the "Load" softkey.
The "Load to... " window opens.
The "... empty location" field is initialized with the number of the first
empty magazine location.
5. Press the "OK" softkey to load the tool into the suggested location.
- OR -
Enter the location number you require and press the "OK" softkey.
- OR -
Press the "Spindle" softkey.
. The tool is loaded into the specified magazine location or spindle.
Tool management
7.2 Tool list
115