Tool Data Oem - Siemens SINUMERIK 840D sl Operating Manual

Tool management

7.4 Tool data OEM

Reactivating and positioning
When the "Reactivate with positioning" function is configured, the selected tool's magazine
location will also be positioned at a loading point. You can exchange the tool.
References
HMI sl / SINUMERIK 840D sl commissioning manual
Multiple load points
If you have configured several loading points for a magazine, then the "Load point selection"
window appears after pressing the "Load" softkey.
Select the required load point and confirm with the "OK" softkey.
7.4 Tool data OEM
In the OEM tool list, you can customize a list according to your specific needs.
References:
For more information, see the following references:
HMI sl / SINUMERIK 840D sl commissioning manual
Proceed as follows
120
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1. Select the "Parameter" operating area.
2. Press the "OEM Tool" soft key.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal