Adding A Port Redundancy; Port Redundancy Wizard - Avaya P460 Manager User Manual

Adding a Port Redundancy

To add a new port redundancy:
Or
* Note: A port cannot participate in more than one redundancy

Port Redundancy Wizard

This section provides detailed information on each of the Port
Redundancy Wizard's screens. To continue to the next screen, click
To return to an earlier screen, click
Wizard without making any changes, click
The Port Redundancy Wizard consists of the following screens:
The following sections describe each of the Port Redundancy Wizard
screens.
Avaya P460 Manager User Guide
1. Click . The Port Redundancy Wizard starts. For more
Wizard
information, refer to "Port Redundancy Wizard" on page 69.
1. Click . A row is added to the Port Redundancy dialog box.
Insert
2. Enter a name for the port redundancy in the
3. Select a port or a LAG from the Tree View or the Chassis View and
drag it to the
Primary Port
appears in the
Primary Port
4. Select a port or a LAG from the Tree View or the Chassis View and
drag it to the
Secondary Port
appears in the Secondary Port
5. Update the device. For more information on updating the device,
refer to "Updating the Device" on page 75.
scheme.
• Welcome
• Primary Port Selection
• Secondary Port Selection
• Name and Type
• Confirmation
Name
field. The port number or LAG name
field.
field. The port number or LAG name
field.
Back . To exit the Port Redundancy
Cancel .
Port Redundancy
field.
Next .
69