Router - Cisco ASR 9000 Serie Configuration Manuals

Implementing IP Service Level Agreements
Command or Action
Step 18
tag text
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-trace)#
mplslm-tag
tag
Step 19 exp exp-bits
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-trace)#
exp 7
Step 20 statistics hourly [buckets hours]
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-trace)#
statistics hourly buckets 2
Step 21
commit
What to Do Next
• Configure the reaction conditions.
• Schedule the MPLS LSP monitoring instance operations.
Configuring the Reaction Conditions for an MPLS LSP Monitoring Instance on
a Source PE Router
Perform this task to configure the reaction conditions for an MPLS LSP monitoring instance.
Before You Begin
The MPLS LSP monitoring instance should be defined before you configure the reaction conditions.
Configuring the Reaction Conditions for an MPLS LSP Monitoring Instance on a Source PE Router
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
Purpose
(Optional) Creates a user-specified identifier for MPLS
LSP operations.
(Optional) Specifies the experimental field value to
be used in the MPLS header of MPLS LSP echo
request packets. The default value is 0.
(Optional) Specifies the statistics collection parameters
for the operations in the MPLS LSP monitoring
instance. The default number of hours is 2.
273