Modifying The Format Of Time Stamps - Cisco ASR 9000 Serie Configuration Manuals

Implementing Logging Services
SUMMARY STEPS
1. configure
2. logging buffered [size | severity]
3. logging console [severity]
4. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
logging buffered [size | severity]
Example:
RP/0/RSP0/CPU0:router(config)#
logging buffered size 60000
Step 3 logging console [severity]
Example:
RP/0/RSP0/CPU0:router(config)#
logging console alerts
Step 4 commit

Modifying the Format of Time Stamps

This task explains how to modify the time-stamp format for syslog and debugging messages.
Purpose
Specifies the logging buffer as a destination for syslog messages, sets the size of
the logging buffer, and limits the syslog messages sent to the logging buffer based
on severity.
• The default for the size argument is 4096 bytes.
• The default for the severity argument is debugging.
• Keyword options for the severity argument are emergencies, alerts, critical,
errors, warnings, notifications, informational, and debugging.
• By default, entering this command without specifying a severity level for the
severity argument or specifying the size of the buffer for the size argument
sets the severity level to debugging and the buffer size to 4096 bytes.
Limits messages sent to the console terminal based on severity.
• Syslog messages are logged to the console terminal at the informational
severity level by default.
• Keyword options for the severity argument are emergencies, alerts, critical,
errors, warnings, notifications, informational, and debugging.
• Entering this command without specifying a severity level for the severity
argument sets the severity level to informational.
Use this command to reenable logging to the console terminal if it was
Note
disabled with the logging console disable command.
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
Modifying the Format of Time Stamps
299