Cisco ASR 9000 Serie Configuration Manuals page 28

Configuring Root-cause and Non-root-cause Alarms
SUMMARY STEPS
1. configure
2. logging correlator rule correlation-rule { type { stateful | nonstateful }}
3. rootcause { msg-category group-name msg-code }
4. nonrootcause
5. alarm msg-category group-name msg-code
6. commit
7. show logging correlator rule { all | correlation-rule1...correlation-rule14 } [ context context1...context
6 ] [ location node-id1...node-id6 ] [ rulesource { internal | user }] [ ruletype { nonstateful | stateful
}] [ summary | detail ]
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 logging correlator rule correlation-rule { type { stateful |
nonstateful }}
Example:
RP/0/RSP0/CPU0:router(config)# logging correlator
rule rule_stateful
Step 3
rootcause { msg-category group-name msg-code }
Example:
RP/0/RSP0/CPU0:router(config-corr-rule-st)#
rootcause CAT_BI_1 GROUP_BI_1 CODE_BI_1
Step 4
nonrootcause
Example:
RP/0/RSP0/CPU0:router(config-corr-rule-st)#
nonrootcause
Step 5 alarm msg-category group-name msg-code
Example:
RP/0/RSP0/CPU0:router(config-corr-rule-st-nonrc)#
alarm CAT_BI_2 GROUP_BI_2 CODE_BI_2
Step 6
commit
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
12
Implementing and Monitoring Alarms and Alarm Log Correlation
Purpose
Configures a logging correlation rule and enters submodes
for stateful and nonstateful rule types.
• Stateful correlations can change specifically if the
root-cause alarm is bistate.
• Nonstate correlations cannot change. All
non-root-cause alarms remain in the correlation
buffers.
Configures a root-cause alarm message.
• This example specifies a root-cause alarm under
stateful configuration mode
Enters the non-root-cause configuration mode
Specifies a non-root-cause alarm message.
• This command can be issued with the
nonrootcause command, such as
nonrootcause alarm msg-category group-name
msg-code