Scheduling An Mpls Lsp Monitoring Instance On A Source Pe Router - Cisco ASR 9000 Serie Configuration Manuals

Implementing IP Service Level Agreements
Command or Action
Step 7
threshold type {consecutive occurrences | immediate}
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-react-cond)#
threshold type consecutive
Step 8
commit
What to Do Next
• Schedule the MPLS LSP monitoring instance operations.

Scheduling an MPLS LSP Monitoring Instance on a Source PE Router

Perform this task to schedule the operations in an MPLS LSP monitoring instance.
SUMMARY STEPS
1. configure
2. ipsla
3. mpls lsp-monitor
4. schedule monitor monitor-id
5. frequency seconds
6. schedule period seconds
7. start-time hh:mm:ss [day | month day]
8. commit
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 ipsla
Example:
RP/0/RSP0/CPU0:router(config)# ipsla
Step 3
mpls lsp-monitor
Example:
RP/0/RSP0/CPU0:router(config-ipsla)# mpls
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
Scheduling an MPLS LSP Monitoring Instance on a Source PE Router
Purpose
Specifies that the designated action is taken after the
specified number of consecutive violations or
immediately. The valid range of occurrences is 1 to
16.
Purpose
Enters IP SLA configuration mode and configures IP service
level agreements.
Enters MPLS LSP monitor mode. From this mode you can
configure an LSP monitor instance, configure a reaction for
an LSP monitor instance, or schedule an LSP monitor
instance.
275