Cisco ASR 9000 Serie Configuration Manuals page 234

Configuring IP Service Levels Using the UDP Jitter Operation
Command or Action
Step 18
life {forever | seconds}
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)# life
30
Step 19
ageout seconds
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
ageout 3600
Step 20 recurring
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
recurring
Step 21 start-time [hh:mm:ss {day | month day} | now | pending
| after hh:mm:ss ]
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
start-time 01:00:00
Step 22 commit
Step 23 show ipsla statistics [operation-number ]
Example:
RP/0/RSP0/CPU0:router # show ipsla statistics
432
Step 24 show ipsla statistics aggregated [operation-number ]
Example:
RP/0/RSP0/CPU0:router # show ipsla statistics
aggregated 432
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
218
Implementing IP Service Level Agreements
Purpose
The forever keyword schedules the operation to run
indefinitely. The seconds argument schedules the lifetime of
the operation, in seconds. The default lifetime of an operation
is 3600 seconds (one hour).
(Optional) Specifies the number of seconds to keep the
operation in memory when it is not actively collecting
information. The default value of 0 seconds means that the
operation never times out.
(Optional) Specifies that the operation starts automatically at
the specified time and for the specified duration every day.
(Optional) Specifies a time for the operation to start. The
following keywords are described:
• (Optional) Use the pending keyword to configure the
operation to remain in a pending (unstarted) state. The
default is inactive. If the start-time command is not
specified, no information is collected until the start time
is configured or a trigger occurs that performs an
immediate start.
• (Optional) Use the now keyword to indicate that the
operation should start immediately.
• (Optional) Use the after keyword and associated
arguments to specify the time after which the operation
starts collecting information.
Displays the current statistics.
Returns the hourly statistics (aggregated data) on the
performance of the network.
The UDP jitter operation provides the following hourly
statistics:
• Jitter statistics—Interprets telephony and multimedia
conferencing requirements.