Cisco ASR 9000 Serie Configuration Manuals page 244

Configuring an ICMP Echo Operation
Command or Action
Step 6 exit
Example:
RP/0/RSP0/CPU0:router(config-ipsla-icmp-echo)#
exit
RP/0/RSP0/CPU0:router(config-ipsla-op)# exit
RP/0/RSP0/CPU0:router(config-ipsla)# exit
RP/0/RSP0/CPU0:router(config)#
Step 7 ipsla schedule operation op-num
Example:
RP/0/RSP0/CPU0:router(config)# ipsla schedule
operation 432
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
Step 8 life {forever | seconds}
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)# life
30
Step 9 ageout seconds
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
ageout 3600
Step 10 recurring
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
recurring
Step 11 start-time [hh:mm:ss {day | month day} | now |
pending | after hh:mm:ss]
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
start-time 01:00:00
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
228
Implementing IP Service Level Agreements
Purpose
Exits IP SLA operation configuration mode and IP SLA
configuration mode. Returns to global configuration mode.
Schedules the start time of the operation. You can configure a
basic schedule.
The forever keyword schedules the operation to run
indefinitely. The seconds argument schedules the lifetime of
the operation, in seconds. The default lifetime of an operation
is 3600 seconds (one hour).
(Optional) Specifies the number of seconds to keep the
operation in memory when it is not actively collecting
information. The default value of 0 seconds means that the
operation never times out.
(Optional) Specifies that the operation starts automatically at
the specified time and for the specified duration every day.
Specifies a time for the operation to start. The following
keywords are described:
• (Optional) Use the pending keyword to configure the
operation to remain in a pending (unstarted) state. The
default value is inactive. If the start-time command is
not specified, no information is collected until the start
time is configured or a trigger occurs that performs an
immediate start.
• (Optional) Use the now keyword to indicate that the
operation should start immediately.
• (Optional) Use the after keyword and associated
arguments to specify the time after which the operation
starts collecting information.