Table of Contents
Advertisement
Configuring Logging Correlation Rule Sets
SUMMARY STEPS
1. configure
2. logging correlator rule correlation-rule { type { stateful | nonstateful }}
3. timeout [ milliseconds ]
4. commit
5. show logging correlator rule {all | correlation-rule1 ... correlation-rule14 } [ context context1 ... context
6 ] [ location node-id1...node-id6 ] [ rulesource { internal | user }] [ ruletype { nonstateful | stateful
}] [ summary | detail ]
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
logging correlator rule correlation-rule { type { stateful
| nonstateful }}
Example:
RP/0/RSP0/CPU0:router(config)# logging correlator
rule rule_stateful
Step 3
timeout [ milliseconds ]
Example:
RP/0/RSP0/CPU0:router(config-corr-rule-st)#
timeout 60000
Step 4
commit
Step 5
show logging correlator rule {all | correlation-rule1 ...
correlation-rule14 } [ context context1 ... context 6 ] [
location node-id1...node-id6 ] [ rulesource { internal |
user }] [ ruletype { nonstateful | stateful }] [ summary
| detail ]
Example:
RP/0/RSP0/CPU0:router# show logging correlator
rule all
Configuring Logging Correlation Rule Sets
This task explains how to configure logging correlation rule sets.
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
10
Implementing and Monitoring Alarms and Alarm Log Correlation
Purpose
Configures a logging correlation rule.
• Stateful correlations can change specifically if the
root-cause alarm is bistate.
• Nonstate correlations cannot change. All
non-root-cause alarms remain in the correlation
buffers.
Specifies the collection period duration time for the logging
correlator rule message.
• Timeout begins when the first alarm message
identified by the correlation rule is logged.
(Optional) Displays defined correlation rules.
• The output describes the configuration of each rule
name, including the message category, group, and
code information.
Advertisement
Table of Contents
