Handset - Cleaning
Inlet Filter - Cleaning/Renewing
Read the section "Important Safety Information" first.
1.
Electrical supply is turned
off at the mains.
4.
Hold a wrench across the flats of the plastic connector. Unscrew the Filter
using another wrench as shown. Clean or renew the Filter as necessary. Refit
in reverse order, making sure the Filter is screwed fully home.
Do not overtighten. Make sure plumbing connections are sealed before
restoring electricity supply.
MAINTENANCE
Clean with mild washing up detergent or
soap solution. Wipe dry with soft cloth.
Poor shower performance can be avoided
by cleaning the spray head. Use thumb
or soft cloth to wipe rubber nozzles. The
handset must also be descaled regularly.
2.
Turn water supply fully
off.
5.
26
3.
Remove three screws,
C o v e r a n d S e r v i c e
Tunnel.