Component Descriptions; External Luminaire Components - Philips VL1000 TS Service Manual

VARI❋LITE® - VL1000™ ERS L

Component Descriptions

External Luminaire Components

The following illustration shows the external luminaire components and controls.
Input Panel
Provides DMX In and
Thru, and AC Power
connections.
Lamp Power
Input Cable
Yoke Leg (Power)
Contains power supply,
and ignitor board (arc
units) or dimmer (dimmer
units).
Accessory Frame Holder
Provides frame for
optional silks, frosts, color.
correction or top hats.
See detail...
Menu Display Controls
Address
MENU ENTER
Press to
show menu,
or if at first
level, the
Press to select current menu
current
option or current data value.
address.
6
S
UMINAIRE
Base
Provides hook mounting
holes and safety cable
connection.
Yoke Leg (Control)
Contains main control
PCB and display PCB.
Head Assembly
Houses color, gobo, dimmer, strobe,
and optional shutter or iris mechanisms.
LCD Display
Down / Decrease
Up / Increase
14-May-2009
M
ERVICE ANUAL
Latch
Accepts frames
or top hats
Accessory Frame Holder
Backcap Assembly
Provides access to lamp
for replacement and
provides controls for
beam adjustment.
Menu Display
Used to input manual
commands, program, test,
set defaults and access
internal status information.
Input Panel Connections
Lamp Power
Input Cable
Data In
Accessory Frame
Beam Adjustment Controls
Beam
Adjust
Screws *
* Do not remove or use to access lamp.
3-Pole Neutrik
Locking Connector
for AC Input
Data Thru
02. 96 63. 001 0 F
Gel, Silk
or Frost