Edge/Zoom/Color Bulkhead Replacement - Philips VL1000 TS Service Manual

VARI❋LITE® - VL1000™ ERS L

Edge/Zoom/Color Bulkhead Replacement

Parts:
ASSEMBLY, EDGE CONTROL, DIMMER AND COLOR (21.9663.1003)
Tools:
#2 Phillips screwdriver
To remove and replace edge/zoom/color bulkhead:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Remove front cover. (Refer to
Step 3. At edge/zoom/color assembly, disconnect wiring harness connections.
Step 4. At side rail, remove four 8-32x1/2" PFB screws
Step 5. At front, remove four 8-32 Keps nuts and remove assembly.
Step 6. Replace assembly by doing steps 2 through 5 in reverse.
8-32x1/2" PFB Screw
Edge/Zoom/Color
Assembly
40
S
UMINAIRE ERVICE
Side Rail
8-32 Keps Nut
Figure 2-18: Edge/Zoom/Color Bulkhead Replacement
14-May-2009
M
ANUAL
"Front Cover Removal" on page
(Figure
26.)
2-18).
NOTE:
Yoke not shown for clarity.
02. 96 63. 001 0 F