Firmware Update - Integra DTR-5.9 Service Manual

FIRMWARE UPDATE-1

GENERAL
To check version of Main Microprocessor, DSP and Video FW
1. Press and hold down Display Display button, then press On/Standby
The main microprocessor version will be displayed on Front Display for about 3 seconds.
Ma in 1 .0 3 /0 8 6 3 0 A
2. Press + (Tone) button while the version is displayed. Then, " D S P S R6 0 6 :0 86 1 1 A " will be displayed.
In this way, as + (Tone) button is pressed while a version is displayed, the next information will be displayed.
If - (Tone) button is pressed, the order will be reversed.
Ma in 1 .0 3 /0 8 6 3 0 A
- (Tone) (Tone)
D S P S R 6 0 6 :0 8 6 1 1 A
V D 1 .2 0 / 0 8 6 0 6 A
N E T :1 .0 0
3. Press On/Standby button to power off.
UPDATE OF MAIN MICROPROCESSOR-1/2
Preparation for update
Hardware tool
1. PC(Personal computer) with RS232 terminal
OS : Windows XP or 2000
2. Flashwriter jig : 0JFLASH 0JFLASH and 0JFLASHEX
Software tool
Writing soft : "Update_SR606Main1.2.zip Update_SR606Main1.2.zip" for Main microprocessor (File name depends on the version).
Unzip "Update_SR606Main1.2.zip" in advance.
Connection and setup
1. While the target unit is off, connect 0JFLASH and 0JFLASHEX (for non-Main) to RS232 port of the PC.
2. Connect the FFC(Flat cable) of the jig to the connector slot on the rear panel.
3. Power on the unit.
RS232C terminal
PC(Personal computer)
On/Standby button when the unit is power on.
Version of Main Microprocessor FW
*Number depends on version.
Version of Main Microprocessor FW (Q701) Version of Main Microprocessor FW (Q701)
*Number depends on version
+ (Tone) (Tone)
Version of DSP FW (Q282) Version of DSP FW (Q282)
*Number depends on version
Version of VIDEO FW (Q8085) Version of VIDEO FW (Q8085)
*Number depends on version
Version of Network microprocessor FW (Q1001) Version of Network microprocessor FW (Q1001)
0JFLASHEX (including 2 Types : for non-Main)
0JFLASH
Conversion
M16C Flash starter
<Note>
For non-main (4 line cut)
--- Soldering side ---
0JFLASHEX
Flat cable
adaptor
Rear panel
DTR-5.9
Connector slot for update
Contact side
HDMI
ASSIGNABLE
IN 4 IN 3 IN 1
IN 2 OUT
DIGITAL IN COMPONENT VIDEO
Y
1
(DVD)
COAXIAL GAME/TV CBL/SAT VCR/DVR DVD
C B/ P B
2
V
(CBL/SAT)
ASSIGNABLE
C R/ P R
1
S
(GAME/TV)
OPTICAL
IN 2 IN 1(DVD) OUT
IN IN IN IN
OUT
ASSIGNABLE
2
(CD)
IN IN IN IN OUT IN
OUT
L
R
REMOTE
CONTROL
CD TAPE GAME/TV CBL/SAT VCR/DVR
Target unit