Polar Electro S510 User Manual page 15

Polar heart rate monitor user manual
Hide thumbs Also See for S510:
Table of Contents

Advertisement

Setting timers
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until desired timer is displayed. Press OK to start
setting the timer.
7. Scroll up or down to turn the timer on or OFF. Press OK.
Timer OFF: Skip steps 8-9.
8. Scroll up or down to adjust minutes. Press OK.
9. Scroll up or down to adjust seconds. Press OK.
Setting heart rate limits
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until desired Limits is displayed.
7. Press OK to enter the limits loop.
8. Lim High appears. Scroll up or down to adjust your upper limit. Press OK.
9. Lim Low appears. Scroll up or down to adjust your lower limit. Press OK.
Turning heart rate limits on/off
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until Limits is displayed.
7. Press and hold the signal/light button to turn limits on or off. Release.
Manual S510 GBR C.pm6
26-27
Setting interval type
You can select 4 optional types of intervals:
A. Time-based interval
B. Heart-rate-based interval
C. Distance-based interval
D. Manual interval
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until Interval TIMER/ Hr/ DIST/ MANUAL is displayed.
7. Scroll up or down to select the interval type that will be used to end the
B 26
Ends your interval when you have
used the selected time.
Ends your interval as you reach
the selected heart rate.
When selecting heart-rate-based interval,
recovery calculation must be set on.
Ends your interval as you reach
the selected distance.
End the interval training session
by pressing OK.
Press OK to start setting the interval type. TIMER/ Hr/ DIST/ MANUAL is
flashing.
interval. Press OK. If you chose manual interval skip steps 8 - 9.
B 27
8.3.2001, 12:44

Advertisement

Table of Contents
loading

Table of Contents