DURKOPP ADLER 512-211-01 Service Instructions Manual page 32

Adjusting the height of the fabric clamp lift
Adjusting the fabric clamping feet (class 512)
Faults caused by an incorrect setting
• The two fabric clamping feet do not raise and lower synchronously.
Fig. 22: Adjusting the fabric clamping feet
①
(1) - Screw
Adjusting steps
1. Loosen the screws (1).
2. Align the fabric clamping feet synchronously.
3. Tighten the screws (1).
30 Service Instructions 512-211-01/532-211-01 - 01.0 - 10/2017