Setting The Time Of Day; Setting The Date - Polar Electro F92tiTM User Manual

Setting the Time of Day

1. In the Time of day display press
OPTIONS is displayed.
2. Press START/STOP/OK to enter the Options mode.
USER SET is displayed.
3. Press Up or Down until WATCH SET is displayed.
4. Press START/STOP/OK to start the watch settings.
ALARM is displayed.
ON or OFF is flashing.
5. Press START/STOP/OK until TIME and the time of day are
displayed.
TIME and the time of day are displayed.
12h or 24h is flashing.
6. Press Up or Down to select 12h or 24h mode.
7. Press START/STOP/OK to lock your selection.
If you chose 12h time mode, TIME AM or TIME PM is
displayed.
8. Press Up or Down to select AM or PM.
9. Press START/STOP/OK to lock your selection.
The hours start to flash.
10. Press Up or Down to adjust the desired hour.
11. Press START/STOP/OK to lock your selection.
The minutes start to flash.
12. Press Up or Down to adjust the desired minutes.
The seconds go to zero.
13. Press START/STOP/OK to lock your selection.
The seconds start running.
56 ENGLISH
Up or Down until
Choose from the following two alternatives to continue:
1. To set the date continue in chapter Setting the date.
2. To return to the Time of day display, press and hold
START/STOP/OK.

Setting the Date

1. In the Time of day display press
OPTIONS is displayed.
2. Press START/STOP/OK to enter the Options mode.
USER SET is displayed.
3. Press Up or Down until WATCH SET is displayed.
4. Press START/STOP/OK to start the watch settings.
ALARM is displayed.
ON or OFF is flashing.
5. Press START/STOP/OK until DAY or MONTH is displayed.
The date is displayed differently depending on which time mode
(12h or 24h) has been chosen.
12h time mode:
MONTH – DAY –YEAR
Up or Down until
DAY or MONTH is
displayed.
The first digits start
to flash.
24h time mode:
DAY – MONTH – YEAR