Function 91 Mobile Network Selection - Ingenico Move/3500 Manual

Function 91 Mobile Network Selection

Press until the 'System Menu' is displayed and enter the Function Code 91
as described in 'Selecting Function Codes'
Your terminal will automatically pick-up a best available network, however if
required you may manually select a preferred network. This will ensure that the
terminal will always connect to your preferred provider.
To enable the manual mode press
The terminal will now remain in 'Manual Mode' until you re-select 'Automatic
Mode'.
Page 65
Press to change
to 'Manual Mode'.
The terminal will
scan for and list
all the available
networks.
Move/3500 User Guide
above.
until the 'System Menu' is displayed:
Use or to
highlight the
required network
and then press
to select it.
The terminal will
register with the
selected
network.
Press to
confirm.
Copyright© 2017 Ingenico