Installing a Paper Roll
Open the paper compartment by lifting the catch located at the rear
•
of the terminal and pull the cover to the rear of the terminal.
Insert the paper roll in the compartment following the directions shown
•
in the picture
Pull the paper up to the top of the terminal
•
Hold the paper and close the lid
•
Press simultaneously on both upper corners of the paper flap, as shown
•
by arrows on picture, until it clips into position
When a new paper roll is inserted, tear off the first length (one
complete turn) to avoid printing on the
tape
Page 16
Move/3500 User Guide
residue
of the adhesive
Copyright© 2017 Ingenico