Terminal Connections; Μusb; Μsd Memory Card - Ingenico Move/3500 Manual

Terminal Connections

µUSB
There is a Micro-USB connector on the left side of the Move/3500
wireless terminal. (see picture). This connector manages Host and
Slave connections.
The terminal supports USB
keys with FAT16 or FAT32
The USB key has to be used
with an USB adapter (refer to
accessories section)
µSD Memory Card
Insert the MicroSD memory
card into the connector slot
as shown on the picture
MicroSD connector is located
on terminal side.
The terminal supports
MicroSD up to 32GB
Switch off the terminal prior to installing a Micro SD
Page 10
Connector used for USB key etc.
Durability: up to 10,000 mating cycles
Move/3500 User Guide
USB micro AB
MicroSD Slot
Copyright© 2017 Ingenico