Excluding An Interface From Ip Fast Reroute Per-Link Computation; Enabling Ospf Interaction With Srms Server - Cisco ASR 9000 Series Routing Configuration Manual

Implementing OSPF

Excluding an Interface From IP Fast Reroute Per-link Computation

SUMMARY STEPS
1. configure
2. router ospf process-name
3. area area-id
4. interface type interface-path-id
5. fast-reroute per-link exclude interface type interface-path-id
6. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 router ospf process-name
Example:
RP/0/RSP0/CPU0:router(config)# router ospf
Step 3
area area-id
Example:
RP/0/RSP0/CPU0:router(config)#area area-id
Step 4 interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf)#interface type
interface-path-id
Step 5 fast-reroute per-link exclude interface type
interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf-ar)# fast-reroute
per-link exclude interface GigabitEternet0/5/0/1
Step 6
commit

Enabling OSPF Interaction with SRMS Server

To enable OSPF interaction with SRMS server:
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Excluding an Interface From IP Fast Reroute Per-link Computation
Purpose
Enables the OSPF routing for the specified routing
process and places the router in router configuration
mode.
Enters area configuration mode.
Enters interface configuration mode and associates
one or more interfaces to the area.
Excludes an interface from IP fast reroute per-link
computation.
489