Interface Tunnel-Ip (Gre) - Cisco CRS User Manual

IPSec Commands

interface tunnel-ip (GRE)

To configure a tunnel interface for generic routing encapsulation (GRE), use the interface tunnel-ip command
in global configuration mode. To delete the IP tunnel interface, use the no form of this command.
interface tunnel-ip number
no interface tunnel-ip number
Syntax Description
number
Command Default
None
Command Modes
Global configuration
Command History
Release
Release 3.9.0
Usage Guidelines
Task ID
Task ID
interface
Examples
The following example shows how to use the interface tunnel-ip command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface tunnel-ip 50000
RP/0/RP0/CPU0:router(config-if)#
OL-24740-01
Instance number of the interface. The range is from 0 to 65535.
Modification
This command was introduced.
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Operations
read, write
interface tunnel-ip (GRE)
133