Cisco ASR 9000 Series Routing Configuration Manual page 210

Disabling Selective VRF Download
DETAILED STEPS
Command or Action
Step 1
admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 2 configure
Example:
RP/0/RSP0/CPU0:router(admin)#configure
Step 3 no svd platform enable
Example:
RP/0/RSP0/CPU0:PE51_ASR-9010(admin-config)#no svd platform enable
Step 4
commit
Step 5 show svd state
Example:
RP/0/RSP0/CPU0:router#show svd state
Selective VRF Download (SVD) Feature State:
SVD Configuration State
SVD Operational State
Step 6
admin
Example:
RP/0/RSP0/CPU0:router#admin
Step 7
reload location all
Example:
RP/0/RSP0/CPU0:router(admin)#reload loc all
Tue Feb 12 07:51:25.279 UTC
Preparing system for backup. This may take a few minutes especially
for large
configurations.
Status report: node0_RSP0_CPU0: START TO BACKUP
Status report: node0_RSP0_CPU0: BACKUP HAS COMPLETED
SUCCESSFULLY
[Done]
Proceed with reload? [confirm]RP/0/RSP0/CPU0::This node received
reload
Step 8 exit
Example:
RP/0/RSP0/CPU0:router(admin)#exit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
180
Unsupported
Unsupported
Implementing BGP
Purpose
Enters administration EXEC mode.
Enters Administrative configuration
mode.
Disables Selective VRF Download.
Displays Selective VRF download
feature state information.
Enters administrator mode.
Reloads the chassis.
Exits administrator mode and enters
EXEC mode.