Configure Link Group Profile - Cisco ASR 9000 Series Routing Configuration Manual

Implementing IS-IS

Configure Link Group Profile

Perform this task to configure Intermediate System-to-Intermediate System (IS-IS) link group profiles:
SUMMARY STEPS
1. configure
2. router isis instance-id
3. link-group link-group-name { [ metric-offset count | maximum ] | [ minimum-members count |
revert-members count ] }
4. commit
5. show isis interface
6. show isis lsp
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 router isis instance-id
Example:
RP/0/RSP0/CPU0:router(config)# router
isis purple
Step 3 link-group link-group-name { [
metric-offset count | maximum ] | [
minimum-members count |
revert-members count ] }
Purpose
Enters IS-IS configuration submode.
Specifies link-group values. Following are the valid values:
• metric-offset: Configures the metric offset for link group. The range
is 1-16777214. The default metric offset range is between 1-63 for
narrow metric; and 1-16777214 for wide metric.
The maximum option here sets the maximum wide metric offset.
All routers exclude this link from their SPF.
• minimum-members: Configures the minimum number of members
in the link group. The range is 2-64.
• revert-members: Configures the number of members after which
to revert in the link group. The range is 2-64.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
ISIS Link Group
391