Configuring Coexistence Between Bfd Over Bundle (Bob) And Bfd Over Logical Bundle Blb) - Cisco ASR 9000 Series Routing Configuration Manual

Configuring Coexistence Between BFD over Bundle (BoB) and BFD over Logical Bundle (BLB)
Command or Action
Step 3
show bfd counters [ [ipv4 | ipv6 | all] packet [interface type
interface-path-id] location node-id
Example:
RP/0/RSP0/CPU0:router# show bfd counters all packet
location 0/3/cpu0
Configuring Coexistence Between BFD over Bundle (BoB) and BFD over Logical
Bundle (BLB)
Perform this task to configure the coexistence mechanism between BoB and BLB:
Before You Begin
You must configure one or more linecards to allow hosting of MP BFD sessions. If no linecards are included,
linecards groups will not be formed, and consequently no BFD MP sessions are created. For default settings
of group size and number, at least two lines with the bfd multiple-paths include location node-id command
and valid line cards must be added to the configuration for the algorithm to start forming groups and BFD
MP sessions to be established.
As sample configuration is provided:
(config)#bfd multipath include location 0/0/CPU0
(config)#bfd multipath include location 0/1/CPU0
SUMMARY STEPS
1. configure
2. bfd
3. Use one of these commands:
4. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 bfd
Example:
RP/0/RSP0/CPU0:router(config)#bfd
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
280
• bundle coexistence bob-blb inherit
• bundle coexistence bob-blb logical
Purpose
Verifies that the BFD counters for IPv4 packets,
IPv6 packets, or all packets have been cleared.
Purpose
Configures Bi-directional Forwarding Detection (BFD)
and enters global BFD configuration mode.
Implementing BFD