Excluding An Interface From Ip Fast Reroute Per-Link Computation - Cisco NCS 6000 Series Configuration Manual

Implementing OSPF
3. area area-id
4. interface type interface-path-id
5. fast-reroute per-link { enable | disable }
6. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 router ospf process-name
Example:
RP/0/RP0/CPU0:router(config)# router ospf
Step 3 area area-id
Example:
RP/0/RP0/CPU0:router(config-ospf)#area 1
Step 4 interface type interface-path-id
Example:
RP/0/RP0/CPU0:router(config-ospf-ar)#
GigabitEternet0/5/0/0
Step 5 fast-reroute per-link { enable | disable }
Example:
RP/0/RP0/CPU0:router(config-ospf-ar)#fast-reroute
per-link enable
Step 6 commit

Excluding an Interface From IP Fast Reroute Per-link Computation

SUMMARY STEPS
1. configure
2. router ospf process-name
3. area area-id
4. interface type interface-path-id
5. fast-reroute per-link exclude interface type interface-path-id
6. commit
Excluding an Interface From IP Fast Reroute Per-link Computation
Purpose
Enables OSPF routing for the specified routing process and
places the router in router configuration mode.
Enters area configuration mode.
Enters interface configuration mode and associates one or
more interfaces to the area. .
interface
Enables or disables per-link LFA computation for the
interface.
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
323