Default-Information Originate - Cisco ASR 9000 Series Routing Configuration Manual

Implementing Routing Policy
Attach Point
table-policy
Some BGP route attributes are inaccessible from some BGP attach points for various reasons. For example,
the set med igp-cost only command makes sense when there is a configured igp-cost to provide a source
value.

Default-Information Originate

The default-information originate attach point allows the user to conditionally inject the default route 0.0.0.0/0
into the OSPF link-state database, which is done by evaluating the attached policy. If any routes in the local
RIB pass the policy, then the default route is inserted into the link-state database.
Attribute Match
as-path in
is-local
length
neighbor-is
originates-from
passes-through
unique-length
as-path-unique-length is, ge, le, eq
community is-empty
matches-any
matches-every
local-preference is, ge, le, eq
destination in
med is, eg, ge, le
next-hop in
origin is
rib-metric —
source in
tag —
traffic-index —
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Attach Points
Set
—
—
—
—
—
—
—
—
set
—
set
set
591