Verify Bgp Flowspec - Cisco ASR 9000 Series Routing Configuration Manual

Implementing BGP Flowspec
Command or Action
summary

Verify BGP Flowspec

Use these different show commands to verify your flowspec configuration. For instance, you can use the
associated flowspec and BGP show commands to check whether flowspec rules are present in your table, how
many rules are present, the action that has been taken on the traffic based on the flow specifications you have
defined and so on.
SUMMARY STEPS
1. show processes flowspec_mgr location all
2. show flowspec summary
3. show flowspec vrf vrf_name | all { afli-all | ipv4 }
4. show bgp ipv4 flowspec
5. show pbr-pal ipolicy all locationnode-id
DETAILED STEPS
Command or Action
Step 1 show processes flowspec_mgr location all
Example:
# show processes flowspec_mgr location all
node: node0_3_CPU0
-------------------------------------------------------------------------
Job Id: 10
PID: 43643169
Executable path: /disk0/iosxr-fwding-5.2.CSC33695-015.i/bin/flowspec_mgr
Instance #: 1
Version ID: 00.00.0000
Respawn: ON
Respawn count: 331
Max. spawns per minute: 12
Last started: Wed Apr
Started on config: cfg/gl/flowspec/
Process group: central-services core: MAINMEM
startup_path: /pkg/startup/flowspec_mgr.startup
Ready: 1.113s
Process cpu time: 0.225 user, 0.023 kernel, 0.248 total
JID TID CPU Stack pri state
1082 1 0 112K
1082 2 1 112K
9 10:42:13 2014
TimeInState
10 Receive 2:50:23:0508
10 Sigwaitinfo 2:52:42:0583
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Purpose
HR:MM:SS:MSEC NAME
0:00:00:0241 flowspec_mgr
0:00:00:0000 flowspec_mgr
Verify BGP Flowspec
Purpose
Specifies whether the flowspec
process is running on your system
or not. The flowspec manager is
responsible for creating,
distributing and installing the
flowspec rules on the hardware.
219