Universal Repeater - TRENDnet TEW-753DAP User Manual

TEW-753DAP User's Guide
System
Operation Mode
You can choose one of the mode to fit your network plan: Access Point,
WDS AP, WDS Bridge and Universal Repeater.
Access Point
This is the default operation mode. Wireless clients,
known as wireless stations (STAs), can wireless associate
with TEW-753DAP and connect to Internet via Ethernet
port.
WDS AP
In this operation mode. TEW-753DAP wireless connects
to other WDS (Wireless Distribution System) for backbone
© Copyright 2013 TRENDnet. All rights reserved.
communication and provides wireless connection to
clients (STAs) at the same time.
WDS Bridge
In this operation mode. TEW-753DAP connects ONLY to
other WDS (Wireless Distribution System) as a backbone
bridge.

Universal Repeater

TEW-753DAP repeats wireless signal and packets in this
mode for backbone communication as well as client
access. This feature is used to expand your existing
wireless network on places your current access point is
unable to reach. Make sure all the settings of the TEW-
753DAP matches to your root or connecting wireless
access points, same SSID, channel and wireless encryption
settings.
IP Settings
The TEW-753DAP has a static IP 192.168.10.100 set in factory for
management purpose. You can change this IP address to fit your
network plan. You can also set TEW-753DAP to DHCP client accepting IP
dynamically.
System Configuration
19