TRENDnet TEW-753DAP User Manual page 37

TEW-753DAP User's Guide
Fragment Threshold : Packets over the specified size will
be fragmented in order to improve
performance on noisy networks. Specify a
value between 256 and 2346. The default
value is 2346.
RTS Threshold : Packets over the specified size will use
the RTS/CTS mechanism to maintain
performance in noisy networks and
preventing hidden nodes from degrading
the performance. Specify a value between
0 and 2347. The default value is 2347
© Copyright 2013 TRENDnet. All rights reserved.
Beacon Interval : Beacons are packets sent by a wireless
Access Point to synchronize wireless
devices. Specify a Beacon Interval value
between 24 and 1024. The default value is
set to 100 milliseconds.
DTIM Period : A DTIM is a countdown informing clients
of the next window for listening to
broadcast and multicast messages. When
the wireless Access Point has buffered
broadcast or multicast messages for
associated clients, it sends the next DTIM
with a DTIM Period value. Wireless clients
detect the beacons and awaken to receive
the broadcast and multicast messages.
The default value is 1. Valid settings are
between 1 and 10.
Data rate : You can select a data rate from the drop-
down list, however, it is recommended to
select auto. In auto mode, TEW753DAP
will choose the maximum data rate to
fit the instant wireless channel quality
automatically.
N Data Rate : Select different 802.11N Modulation and
Coding Scheme (MCS) against particular
wireless noise. Or, select auto letting
TEW-753DAP select MCSs dynamically.
Channel Bandwidth : Select channel bandwidth for
1) Dynamic select 20 MHz and 40MHz
bandwidth or 2) choose 20MHz channels
only�
Preamble Type : Select a short or long preamble. For
optimum performance it is recommended
to also configure the client device to the
same preamble type.
System Configuration
35