TRENDnet TEW-753DAP User Manual page 43

TEW-753DAP User's Guide
SNMP Active : Choose to enable or disable the SNMP
feature
SNMP Version : Select SNMP version from the drop-down
list
SNMP Manager IP : Specify the SNMP manager IP address
Read Community Name : Specify the password for access the SNMP
community for read only access
Set Community Name : Specify the password for access to the
SNMP community with read/write access
System Location : Specify the location of the TEW-753DAP
System Contact : Specify the contact details of the TEW-
753DAP
Trap Active : Choose to enable or disable the SNMP
trapping feature
Trap Manager IP : Specify the password for the SNMP trap
community
Trap Community : Specify the name of SNMP trap
community
Apply : Click this button to apply the change
Cancel : Click this button to abandon the change
SNMP Settings
SNMP Setting allows you to assign the contact details, location,
community name and trap settings for SNMP. This is a networking
management protocol used to monitor network-attached devices.
SNMP allows messages (called protocol data units) to be sent to various
parts of a network. Upon receiving these messages, SNMP-compatible
devices (called agents) return data stored in their Management
Information Bases.
© Copyright 2013 TRENDnet. All rights reserved.
SNMP Active : Choose to enable or disable the SNMP
feature
SNMP Version : Select SNMP version from the drop-down
list
SNMP Manager IP : Specify the SNMP manager IP address
Read Community Name : Specify the password for access the SNMP
community for read only access
System Configuration
41