TRENDnet TEW-753DAP User Manual page 25

TEW-753DAP User's Guide
Security : Wireless security was setup to this SSID.
VID : VLAN id for this SSID
Enable : Check this box to enable this SSID
Edit : Click Edit to change the settings of this
SSID
(Save & Reload is required to take effect.)
AP Detection
Before you setup your TEW-753DAP wireless settings, you may
want to know what signal is current running in the air. Click Scan
to make a site survey and list available access points around you.
BSSID : Basic SSID. This is strictly unique SSID to
identify a wireless access point, WAP. It
is also the MAC address of the wireless
interface.
SSID : Service Set Identifier. This SSID is human
readable and performs as ESSID to setup
wireless groups.
Channel : 2.4GHz wireless channel number
Signal Level : The signal strength from the access point.
© Copyright 2013 TRENDnet. All rights reserved.
Type : The 802.11 wireless mode this access
point provides.
Security : Which wireless security was set to use.
Mode: This wireless source works on
infrastructure mode or ad hoc mode.
Go Back : Click this button to go back
SSID Settings
Click Edit one the SSID you want to edit. The following setup
window will appear.
2.4G/5G SSID Profile
SSID Specify the SSID for the current profile.
Suppressed SSID Check this option to hide the SSID from clients. If
checked, the SSID will not appear in the site survey.
Station Separation Click the appropriate radio button to allow or prevent
communication between client devices.
Wireless Security See the Wireless Security section.
Save / Cancel Click Save to accept the changes or Cancel to cancel
System Configuration
23