TRENDnet TEW-753DAP User Manual page 39

TEW-753DAP User's Guide
WPS Via Click on the Start to Process button if
Push Button : you would like to enable WPS through
the Push Button instead of the PIN.
After pressing this button you will
be required to press the WPS on the
client device within two minutes. Click
on the OK button in the dialog box
WPS via PIN : Specify a PIN, which unique number
that can be used to add the router to
an existing network or to create a new
network. Then click on the Start to
Process button
© Copyright 2013 TRENDnet. All rights reserved.
System Configuration
37