Data Collecting Unit Vr-7010 - Furuno VR-7000 Installation Manual

2. WIRING
2.1

Data Collecting Unit VR-7010

Note: The DCU can record a maximum of three channels of video data, within the stip-
ulated time. A maximum of seven channels of video data can be input, however four
or more channels can not be recorded within the stipulated time.
2.1.1 Location of connectors and terminals
To make connections, unfasten seven binding screws, then detach the cover from the
DCU.
Note: Turn OFF the ship's mains before making connections.
From top:
J32* (COM2)
J31* (COM1)
From left:
J11 (LAN1)
J12 (LAN2)
J13 (LAN3)
J14 (LAN4)
J15 (LAN5)
J16 (LAN6)
Connectors for serial input Connectors for serial input
From left: From left:
J301 (CH1) J301 (CH1)
J302 (CH2) J302 (CH2)
From top: From top:
J311 (DRU POWER) J311 (DRU POWER)
J312 (FLOAT DRU POWER) J312 (FLOAT DRU POWER)
J313 (SENSOR ADAPTER POWER) J313 (SENSOR ADAPTER POWER)
From left: From left:
J202 (VHF2) J202 (VHF2)
J201 (VHF1) J201 (VHF1)
J204 (MIC2) J204 (MIC2)
J203 (MIC1) J203 (MIC1)
J206 (MIC4) J206 (MIC4)
J205 (MIC3) J205 (MIC3)
J208 (MIC6) J208 (MIC6)
J207 (MIC5) J207 (MIC5)
J210 (MIC8) J210 (MIC8)
J209 (MIC7) J209 (MIC7)
2-2
J35* (VGA)
*: Connector for the maintenance
: Occupied for the internal wiring
J501 (DATA)
J502 (DATA)
AC switch
Battery switch
Fuse for AC power
Fuse for battery
Power control panel
Data collecting unit (cover removed)
From top:
J39* (USB)
J38* (USB)
From left:
J21 (LAN9)
J22 (LAN10)
J23 (LAN11)
J24 (LAN12)
J25 (LAN13)
J26 (LAN14)
Connectors for
serial input
From top:
J303 (CH3)
J304 (CH4)
J305 (CH5)
J306 (CH6)
J307 (CH7)
J308 (CH8)
Power control panel
See figure below.
J1 (AC IN)
From top:
J309 (RAP)
J310 (AMS)
Battery:
Confirm that the date
on the label here is
within a year.