Table of Contents
Advertisement
Parameter
Server IP
Mapping Ports
Type
Comment
Enable
3.4.4 ALG Settings
You can select applications that need "Application Layer Gateway" to support.
Parameters
Enable
Description
Default
This is the private IP of the server behind the
NAT firewall.
Note: You need to give your LAN PC clients a
fixed/static IP address for Port Forwarding to
work properly.
The range of ports to be forward to the private IP.
This is the protocol type to be forwarded. You
can choose to forward "TCP" or "UDP" packets
only or select "both" to forward both "TCP" and
"UDP" packets.
The description of this setting.
To enable the rule of Port Forwarding
Description
You can select to enable "Application Layer
Gateway" of an application and then the router
will let that application correctly pass though the
NAT gateway.
37
Advertisement
Table of Contents
