Table of Contents
Advertisement
Parameters
Destination LAN IP, Subnet Mask
Gateway
3.7 UPnP
With UPnP, all PCs in you Intranet will discover this router automatically. So you do not have to
do any configuration for your PC and can access the Internet through this router easily.
Parameters
Enable UPnP
UPnP Port Number
Advertise Time (60 ~ 1800)
Subscribe Timeout (60 ~ 1800)
Description
Specify the destination LAN IP where the
packets will be routing to.
Specify the other gateway IP that will route the
packets to the destination.
Description
After you enable the UPnP feature, all client
systems that support UPnP, like Windows XP,
can discover this router automatically and
access the Internet through this router without
any configuration.
Specify the port number for UPnP service using.
When UPnP service is working, router will
broadcast a message to LAN that the specific
port number has been used in a period of time.
The maximum timing is up to 1800 seconds.
When client stops responding UPnP service for
a period of time, router will break down the
UPnP connection automatically and UPnP
service will be in standby mode. The maximum
time is up to 1800 seconds.
44
Advertisement
Table of Contents
