L2Tp - Planet XRT-401E User Manual

Internet broadband router
Hide thumbs Also See for XRT-401E:
Table of Contents

Advertisement

PPTP Password
Retype Password
Service IP Address
My IP Address
My Subnet Mask
Connection ID
Maximum Idle Time

2.5 L2TP

Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Enter the Password provided by your ISP for the PPTP
connection.
Re-enter the Password for confirmation.
Specify PPTP Server IP address that you want to connect to.
This is the IP address that your ISP has given you to establish
a PPTP connection.
Enter the Subnet Mask provided by your ISP.
255.255.255.0)
This is the ID given by ISP. This is optional.
You can specify an idle time threshold (seconds) for the WAN
port. This means if no packets have been sent (no one using
the Internet) during this specified period, the router will
automatically disconnect the connection with your ISP.
15
(e.g.

Advertisement

Table of Contents
loading

Table of Contents