Chapter 5. System Settings - Planet FRT-405N User Manual

300mbps 802.11n wireless internet fiber router

Hide thumbs Also See for FRT-405N:

Table of Contents

User Manual of FRT-405N

Chapter 5. System Settings

Determine your Connection Settings

Before you configure the router, you need to know the connection information supplied by your Internet

service provider.

Connecting the Fiber Router to your Network

Unlike a simple hub or switch, the setup of the Fiber Router consists of more than simply plugging everything

together. Because the Router acts as a DHCP server, you will have to set some values within the Router, and

also configure your networked PCs to accept the IP Addresses the Router chooses to assign them.

Generally there are several different operating modes for your applications. And you can know which mode is

necessary for your system from ISP. These modes are router, bridge, and PPPoE+NAT.

Configuring with Web Browser

It is advisable to change the administrator password to safeguard the security of your network. To configure

the router, open your browser, type "http: //192.168.1.1" into the address bar and click "Go" to get to the

Save this address in your Favorites for future reference.

Figure 5-1 Login the Router

At the User Name prompt, type "admin", and the Password prompt, type "admin". You can change these

later if you wish. Click "OK" to login the router and you can start to configure it now.

Table of Contents