Table of Contents
Advertisement
3.4.5 DMZ
If you have a local client PC that cannot run an Internet application (e.g. Games) properly from
behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access
by defining a DMZ Host. The DMZ function allows you to re-direct all packets going to your WAN
port IP address to a particular IP address in your LAN. The difference between the virtual server
and the DMZ function is that the virtual server re-directs a particular service/Internet application
(e.g. FTP, websites) to a particular LAN client/server, whereas DMZ re-directs all packets
(regardless of services) going to your WAN IP address to a particular LAN client/server.
Parameters
Enable
Public IP Address
IP Address of Virtual DMZ
Action
3.5 Firewall
XRT-401E provides extensive firewall protection by restricting connection parameters, thus
limiting the risk of hacker attack, and defending against a wide array of common Internet attacks.
Parameters
2.5.1 Firewall Options
2.5.2 Client Filtering
Description
Enable/disable DMZ
The IP address of the WAN port or any other Public IP
addresses given to you by your ISP
Input the IP address of a particular host in your LAN that will
receive all the packets originally going to the WAN port/Public IP
address above.
Press <Add> to add DMZ rule.
Description
XRT-401E's firewall can block common hacker attacks and can
log the attack activities.
Client Filtering allows you to specify which hosts users can or
cannot access to certain Internet applications by IP address.
38
Advertisement
Table of Contents
