Table of Contents
Advertisement
If you have already configured the Wizard, you do NOT need to configure anything for you to start
using the Internet.
Advance features that allow you to configure the router to meet your network's needs such as:
Special Applications, Port Mapping, DMZ, Virtual Servers, ALG, and Firewall
Below is a general description of what advance functions are available for this broadband router.
Menu
3.1 System
3.2 WAN
3.3 LAN
3.4 NAT
3.5 Firewall
3.6 Routing
3.7 UPnP
3.8 DDNS
Select one of the above advance features selections and proceed to the manual's relevant sub-
section
3.1 System
This section allows you to set XRT-401E's system settings, password and Remote Management
Administrator, it also allows you to check system status and log, and provide you the
configuration tools.
Chapter 3 Advance Features
Description
This section allows you to set XRT-401E's system settings,
password and Remote Management Administrator, it also allows
you to check system status and log, and provide you the
configuration tools.
This section allows you to select the connection method in order
to establish a connection with your ISP (same as the Wizard
section)
You can specify the LAN segment's IP address, subnet Mask,
enable/disable DHCP and select an IP range for your LAN, you
also can check DHCP client list in here.
You can configure the Virtual Server, Special Applications, Port
Mapping, ALG and DMZ functions in this section. This allows you
to specify what user/packet can pass your router's NAT.
The Firewall section allows you to configure Firewall, Client
Filtering, URL Filtering and MAC Control.
You can configure Static Routing in this section, and check the
concurrent Routing Table.
The UPnP section allows you to enable and configure UPnP
function.
You can configure DDNS service in this section.
18
option.
Advertisement
Table of Contents
