Table of Contents
Advertisement
3.3 LAN
The LAN Port screen below allows you to specify a private IP address for your router 's LAN ports
as well as a subnet mask for your LAN segment.
Parameters
LAN Settings
IP address
IP Subnet Mask
DHCP Server
IP Pool Starting/Ending Address
Default
192.168.0.1
255.255.255.0
Enabled
Description
This is the router's LAN port IP address (Your
LAN clients default gateway IP address)
Specify a Subnet Mask for your LAN segment
You can enable or disable the DHCP server. By
enabling the DHCP server the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled then you'll
have to manually set your LAN client's IP
addresses; make sure the LAN Client is in the
same subnet as this broadband router if you
want the router to be your LAN client's default
gateway
You can select a particular IP address range for
your DHCP server to issue IP addresses to your
LAN Clients.
Note: By default the IP range is from: Start IP
192.168.0.2 to End IP 192.168.0.254.
32
Advertisement
Table of Contents
