JVC NX-D4B Service Manual page 10

3.1.10 Removing the FL board (See Fig.14)
(1) Remove the four screws L attaching the FL board.
L
3.1.11 Removing the Touch sensor board (See Fig.15)
(1) Remove the four screws M attaching the Volume board.
(2) Remove the two screws N attaching the LED board.
CAUTION: The touch sensor board sticks to a Front
lens.
M
3.1.12 Removing the Mic board and USB board (See Fig.16)
(1) Remove the two screws P attaching the Slide door.
(2) Remove the four screws Q attaching the Slide arm.
(3) Remove the four screws R attaching the Shaft holder.
(4) Remove the seven screws S attaching the Mic board and
USB board.
R
Q
P
Q
R
1-10 (No.MB726<Rev.001>)
Fig.14
Fig.15
S
Fig.16
L
N
R
Q
P
Q
R