Table of Contents
Advertisement
MIN LED flashes when
volume level is at
0% or audio muted.
MAX LED on solid when
volume level is at
80% or higher.
Figure 24.
Audio or Video Breakaway
To switch the audio or the video separately away from the current input to another input
(audio or video breakaway), enter an audio or a video input selection SIS command (see
the
to another (audio breakaway), the audio switch effect is always a fade, regardless of the
selected video effect. During audio or video breakaway, the audio input button lights red and
the video button lights green. Audio or video breakaway is not available while the DVS is in
PIP mode.
Resetting
The rear panel has a recessed RESET button that initiates various levels of resets. To select
different reset levels, use a pointed stylus or small Philips screwdriver to press and hold the
button while the DVS is running or press and hold the button while applying power to the
scaler.
NOTE: You can also reset the unit to factory defaults using SIS commands (see the
ATTENTION:
NOTES:
VOLUME
MAX
MID
MIN
MIN LED on solid when
volume level is at
1% or higher.
VOLUME
MAX
MID
MIN
MAX LED flashes when
volume level is at
100% (maximum).
Volume Indicator LEDs on the Front Panel
Input Selection commands
Resets commands
on page 68) or from the front panel (see the
screen
on page 33).
•
Review the reset modes carefully. Using the wrong reset mode may result in
unintended loss of flash memory programming, port reassignment, or scaler reboot.
The
table on the next page
•
Analysez minutieusement les différents modes de réinitialisation (voir
suivante). Appliquer le mauvais mode de réinitialisation peut causer une perte
inattendue de la programmation de la mémoire flash, une reconfiguration des ports
ou une réinitialisation du processeur.
•
The reset modes listed in the table on the next page close all open IP and Telnet
connections and all sockets.
•
Each mode is a separate function, not a continuation from mode 1 to mode 5.
•
There is no reset mode 2 for the DVS 510 Series.
VOLUME
MAX
MID
MIN
MID LED on solid when
volume level is at
50% or higher.
VOLUME
MAX
MID
MIN
on page 57). When the audio is switched from one input
provides a summary of the reset modes.
DVS 510 Series • Operation
VOLUME
MAX
MID
MIN
Reset to Factory
tableau page
41
Advertisement
Table of Contents
